Starting The Engine Manually; Stopping The Engine; Connecting Apparatus To The Generator - PowerTec PT6600ES Instruction Manual

F
4. Turn the key start ignition (11) clockwise to the
'START' position (Fig. F).
NOTE: When the motor is started for the very first
time, it may require a number of attempts to start
until the fuel has travelled from the tank to the motor.
5. Once you hear the motor operating, release the
key to allow the position to move from 'START' to
'ON' (Fig. F).
6. Push the choke lever (14) back in towards the
generator. This position will switch the choke
'off'.

Starting the Engine Manually

NOTE: Follow steps 1 to 3 of the 'Starting the
engine with key start' section.
G
4. Turn the key start ignition (11) clockwise to the
'ON' (Fig. G).
5. Slowly pull the recoil starter until you feel it
engage and then pull it briskly.
6. Once you hear the motor operating, push the
choke lever (14) back in towards the generator.
This position will switch the choke 'off'.
12.
PT6600ES PORTABLE GENERATOR

Stopping the Engine

1. Before stopping, ensure that no electrical apparatus
is connected to the generator.
H
2. Turn the key start ignition (11) to the 'OFF' position
(Fig. H).
3. Turn the fuel lever clockwise to the 'off' position.
Connecting Apparatus to the
Generator
1. Start the engine. Allow the engine to run for a couple
of minutes to warm up prior to connecting any
apparatus to the generator.
2. For AC current, ensure the AC safety switch (4) is
turned "OFF" first, then plug the power cord into one
of the AC output sockets (Fig. I).
I
3. Switch the AC safety switch (4) to the "ON" position.
CAUTION:
plugging in.
generator rated output.