Table of Contents
Advertisement
CARING FOR YOUR BREWER
STEP 2: SECOND DESCALING SOLUTION RINSE
• Repeat the cleansing brew process until the Touch-Screen indicates "More Water Please."
Let the brewer stand for at least 30 minutes while still on.
• After 30 minutes, discard any residual solution and rinse the Water Reservoir thoroughly.
STEP 3: FRESH WATER RINSE
• Ensure the Water Reservoir is filled with fresh water to and not beyond the MAX FILL line.
• Place a large mug on the Drip Tray and run a cleansing brew. Pour the contents of the mug
into the sink.
• Repeat the cleansing brew process at least 12 times. You may need to refill the Water
Reservoir at least one time during this process.
NOTE: If "Time to descale the brewer!" is still indicated after completing the procedure, repeat the descaling procedure above.
The cleaning action of Keurig
Descaling Solution may result in a foam dispensed from the
®
brewer. This is natural, as the solution is reacting with the scale inside. For a brewer that is
heavily scaled, the brewer may not fill properly after the descaler is added. If this occurs, you
may see only a small or no output dispensed followed by the sound of air blowing out.
If this occurs:
• Turn off and unplug the brewer.
• If there is Keurig
Descaling Solution in the Water Reservoir, discard the contents,
®
rinse the Water Reservoir thoroughly and refill with bottled or filtered water.
• Plug the brewer back in, power on, and repeat STEP 3: FRESH WATER RINSE (refer to
page 37). The brewer should begin to function normally as the solution is rinsed out and
the scale is removed. If the problem persists, allow the brewer to sit unplugged for at least
30 minutes then continue with the fresh water rinse.
APP-ENABLED FEATURES
Some additional brewer functionality may be available to you via the mobile setup app.
If enabled, the app will provide instructions for these features.
38
RECYCLING K-MUG
AND K-CARAFE
®
The plastic cups of K-Mug
and K-Carafe
®
®
pods can be recycled wherever #5 plastic is
accepted. #5 plastic may not be recyclable
in your community today, so please check
locally with your municipality or waste
hauler, or visit KeurigRecycling.com for
more information.
5
For more information visit
www.KeurigRecycling.com
2.
Once cool, separate the lid and filter
from the cup. The filter will adhere to
the lid.
PODS
2 | TIPS & MAINTENANCE
®
1.
Once brewing is complete, lift the Handle
and carefully remove the K-Mug
or
®
K-Carafe
pod by holding the outer rim.
®
CAUTION: The K-Mug® or K-Carafe
pod will be hot after brewing.
®
Use caution when removing. Allow it to cool completely
before handling.
3.
Once separated, discard the lid and the
attached filter. Recycle the pod's plastic
cup wherever #5 plastic is accepted.
39
Advertisement
Table of Contents
