Using Rds Functions In The Fm Band; Rds (Radio Data System) - JVC KS-FX630R Instructions Manual

Using RDS functions in the FM band

RDS (Radio Data System)

RDS button
To select Network-Tracking mode, press the RDS button for more than one
second.
• Mode 1 (AF (Alternative Frequencies): on/REG: off):
TP/RDS
Network-Tracking is activated.
Switches between stations belonging to the network being received.
Note:
• In Mode 1, the broadcast may switch between different programmes even within
• Mode 2 (AF: on/REG: on):
Network-Tracking is activated and Regional mode is engaged (switches
between stations broadcasting the same programme, at all times).
• Mode 3 (AF: off/REG: off):
Network-Tracking is deactivated.
Network-Tracking reception
When driving in an area where the signal strength drops, the tuner
automatically uses PI (Programme Identification) and AF codes to retune to
the same programme with a stronger signal from another RDS station in the
network. By utilizing these codes, you can continue to listen to the same
programme in its finest condition, no matter where you drive. (See illustration.)
• When the RDS station to which you are tuned does not provide AF data or
the unit is unable to receive AF data for any reason, Network-Tracking
reception will NOT operate even when the signal strength drops below the
reference level.
The same programme can be received on different frequencies.
Programme 1 broadcasting
on frequency A
Programme 1 broadcasting on
frequency B
Programme 1 broadcasting on frequency C
8
All manuals and user guides at all-guides.com
the same network at certain times.
Programme 1 broadcasting on frequency E
Programme 1
broadcasting on
frequency D