Setting Up The Monitor; Installation - Philips B Line 345B1 User Manual

2. Setting up the monitor

2. Setting up the monitor

2.1 Installation

1 Package contents
* Stand/Base
Power
*USB
*Different according to region.
Install the base
2
1. In order to well protect this monitor
and avoid scratching or damaging of
the monitor, keep the monitor face
down in the cushion for the base
installation.
B Line
345B1
Quick
Start
Register your product and get support at
www.philips.com/welcome
2. Hold the stand with both hands.
* I/O Cover
* HDMI
* DP
3. After attaching the base, erect the
This product is curve design, when
attach / detach the base, place the
protective material under the monitor
and do not press down the monitor to
avoid the damage.
5
(1) Gently attach the stand to the
VESA mount area until the latch
locks the stand.Gently attach the
base to the stand.
(2) Use your fingers to tighten the
screw located at the bottom of
the base.
(3) Use screwdriver to tighten the
screw located at the bottom of
the base, and secure the base to
the column tightly.
monitor with both hands on holding
the monitor together with styrofoam
firmly. Now you can pull out the
styrofoam. When you pull out the
styrofoam, do not squeeze the
panel to avoid broken panel.
Warning