1.1 Safety precautions and maintenance • Please use approved power cord provided by Philips at all times. If Warnings your power cord is missing, please Use of controls, adjustments or contact your local service center.
Page 4
1. Important degrees. If the -5 degree downward • In order to maintain the best tilt angle maximum is exceeded, the performance of your monitor and monitor damage will not be covered use it for a longer lifetime, please under warranty. use the monitor in a location that falls within the following • Do not knock or drop the monitor...
1. Important service center. (Please refer to 1.2 Notational Descriptions Service contact information listed in The following subsections describe Important information manual.) notational conventions used in this • For transportation information, document. please refer to “Technical Specifications”. Notes, Cautions and Warnings Throughout this guide, blocks of text • Do not leave your monitor in a car/ may be accompanied by an icon and...
Equipment-WEEE From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled. At Philips, end-of-life management primarily entails participation in national take- back initiatives and recycling programs This marking on the product or on...
B Line 345B1 Quick Start Register your product and get support at www.philips.com/welcome 2. Hold the stand with both hands. Gently attach the stand to the VESA mount area until the latch locks the stand.Gently attach the base to the stand.
Page 8
2. Setting up the monitor Connecting to your PC Fast Charger USB UP step 2 USB UP step 1 Connect to PC Kensington anti-theft lock 1. Connect the power cord to the back Audio Out of the monitor firmly. DisplayPort input 2.
Page 9
The monitor must be powered ON at all connection port. times to be able to use this function. Some select Philips monitors may not Power or Charge your device when it enters to “Sleep/standby” mode (White power LED blinking). In that case, please enter to OSD Menu and select “USB Standby Mode”, then, turn the...
2. Setting up the monitor Customize your own “USER” key 2.2 Operating the monitor This hot key allows you to setup your Description of the control buttons favorite function key. 1. Press button on the front bezel to enter OSD Menu Screen. ...
Page 11
What is On-Screen Display (OSD)? LightSensor On-Screen Display (OSD) is a feature in LowBlue 1, 2, 3, 4 Mode all Philips LCD displays. It allows an end 1 HDMI 2.0 Input user to adjust screen performance or 2 HDMI 2.0 DisplayPort...
Why do I need it? +180˚ With the ultra high resolution Philips -180˚ MultiView display, you can experience a world of connectivity in a comfortable way in the office or at home. With this display, you can conveniently enjoy multiple content sources at one screen.
Page 13
2. Setting up the monitor Open up a sub-window side-by-side of another signal source. (main) When the sub source is not detected: (main) 2. Press ▲ or ▼ button to select main Note menu [PIP / PBP], then press The black strip shows on the top and...
Page 14
2. Setting up the monitor • PIP Size: When PIP is activated, • Off: Stop MultiView function. there are three sub-window sizes to choose: [Small], [Middle], [Large]. (main) Small Middle Large (main) Note When you do the SWAP function, the • PIP Position: When PIP is activated, video and its audio source will swap at there are four sub-window positions...
2. Setting up the monitor Warning 2.4 Remove the Base Assembly This product is curve design, when for VESA Mounting attach / detach the base, place the Before you start disassembling the protective material under the monitor display base, please follow the and do not press down the monitor to instructions below to avoid any possible avoid the damage.
Game, Economy, LowBlue Mode, in real time. Whether you're working SmartUniformity and Off. with text applications, displaying images or watching a video, Philips SmartImage delivers great optimized display performance. Why do I need it? ...
By reducing your display's power time. Developed for wellbeing, consumption, you save on energy costs Philips LowBlue Mode setting uses a and extend the lifetime of your display. smart software technology to reduce harmful shortwave blue light.
4. HDR 4. HDR(345B1CR) HDR Settings in Windows10 system. Steps 1. Right click on the desktop, enter to Display settings. 2. Select the display/monitor. 3. Select an HDR-capable display under Rearrange your displays. 4. Select Windows HD Color settings. 5. Adjust Brightness for SDR content. Note Windows10 edition is required;...
• Reposition your screen to computer vision appropriate height and angle syndrome (CVS) according to your height. 4. Choose Philips monitor for easy-on- eyes. Philips monitor is designed to prevent eye strain caused by prolonged • Anti-glare screen: Anti-glare computer use.
6. PowerSensor™ detection signal for distances up to 6. PowerSensor™ 120 cm or 47 inches. (Setting 4) • Since some dark colored clothing How does it work? tends to absorb infrared signals even when the user is within 100 cm • PowerSensor works on principle or 40 inches of the display, step up of transmission and reception of...
Page 22
6. PowerSensor™ it will automatically turn ON if monitor is returned to its default Landscape position. Note A manually selected PowerSensor mode will remain operational unless and until it is readjusted or the default mode is recalled. If you find that the PowerSensor is excessively sensitive to nearby motion for some reason, please adjust to a lower signal strength.
7. Technical Specifications 7. Technical Specifications Picture/Display Display Panel Type VA (345B1C/345B1CR) Backlight W-LED system Panel Size 34" W (86.36 cm) Aspect Ratio 21:9 Pixel Pitch 0.232(W) x 0.232(H) Contrast ratio(typical) 3000:1 Optimum Resolution 3440x1440@60Hz Viewing Angle 178° (H) / 178° (V) @ C/R > 10 (Typ.) Picture Enhancement SmartImage Display Colors...
Page 24
7. Technical Specifications Stand Tilt -5 / +30 degree Swivel -180 / +180 degree Height adjustment 180mm Power AC Input AC Input AC Input Consumption Voltage at Voltage at Voltage at 100VAC , 50Hz 115VAC , 60Hz 230VAC, 50Hz Normal Operation 58.7 W (typ.) 58.8 W (typ.) 58.9 W (typ.)
Page 25
Finish Texture Note EPEAT rating is valid only where Philips registers the product. Please visit www. epeat.net for registration status in your country. 2. This data is subject to change without notice. Go to www.philips.com/support to download the latest version of leaflet.
7. Technical Specifications Note 7.1 Resolution & Preset Modes Please notice that your display works best at native resolution of 3440x1440 Maximum Resolution @ 60Hz. For best display quality, please 3440x1440 @ 100 Hz (digital input) follow this resolution recommendation. Recommended Resolution 3440x1440 @ 60 Hz (digital input) H.
8. Power Management 8. Power Management If you have VESA DPM compliance display card or software installed in your PC, the display can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the display will 'wake up' automatically.
Other combinations Pixel Defect Policy of lit and dark sub pixels appear as single pixels of other colors. Philips strives to deliver the highest quality products. We use some of the Types of Pixel Defects industry's most advanced manufacturing...
Page 29
Black Dot Defects the warranty period, a TFT Display panel Black dot defects appear as pixels or in a Philips flat panel display must have sub pixels that are always dark or 'off'. pixel or sub pixel defects exceeding the That is, a dark dot is a sub-pixel that tolerances listed in the following tables.
Page 30
9. Customer care and warranty BRIGHT DOT DEFECTS ACCEPTABLE LEVEL 1 lit subpixel 2 adjacent lit subpixels 3 adjacent lit subpixels (one white pixel) Distance between two bright dot defects* >15mm Total bright dot defects of all types BLACK DOT DEFECTS ACCEPTABLE LEVEL 1 dark subpixel 5 or fewer...
Please contact our Philips Customer Service Representative or local contact center (by Consumer care number) for more details. Philips Customer Care Center number listed below.
• Disconnect the display from mains solutions, contact Philips customer power source immediately for safety service representative. • Contact with Philips customer Common Problems service representative immediately. No Picture (Power LED not lit) Imaging Problems • Make sure the power cord is...
Important information manual and • Shut down your computer, contact Philips customer service disconnect your old display and representative. reconnect your Philips LCD display. * Functionality different according to display. • Turn on your display and then turn on your PC.
Page 34
6504K. ethyl alcohol, ethanol, acetone, hexane, etc. Can I connect my LCD display to any PC, workstation or Mac? Ans.: Yes. All Philips LCD displays are fully compatible with standard PCs, Macs and workstations. You may need a cable adapter...
Page 35
Ans.: Your LCD display works best at its native resolution of 3440x1440 Q10: Are Philips LCD displays Plug- @ 60 Hz. For best display, please and- Play? use this resolution. Ans.: Yes, the displays are Plug-and-...
10. Troubleshooting & FAQs 10.3 Multiview FAQs Can I enlarge the PIP sub window? Ans.: Yes, there are 3 sizes to select: [Small], [Middle], [Large]. You can press to enter OSD menu. Select your preferred [PIP Size] option from the [PIP / PBP] main menu.
Page 37
This product has been manufactured by and is sold under the responsibility of Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are regis- tered trademarks of Koninklijke Philips N.V. and are used under license.
Need help?
Do you have a question about the B Line 345B1 and is the answer not in the manual?
Questions and answers