Daikin FT13BV1LS Operation Manual page 14

■ To adjust the vertical blades
(louvers)
Hold the knob and move the louvers.
(You will find a knob on the left-side and the right-side blades.)
Notes on louvers angles
■ ATTENTION
• Always use a remote controller to adjust the louvers angles. In side the air outlet, a fan is rotating at a
high speed. (18, 24 class only)
• Be careful when adjusting the louvers. Inside the air outlet, fan is rotating at a high speed.
(13 class only)
Notes on flap angle
• When "SWING button" is selected, the flaps swinging
range depends on the operation mode. (See the figure.)
Three-Dimensional (3-D) Airflow
• Using three-dimensional airflow circulates cold air,
which tends to collected at the bottom of the room, and
hot air, which tends to collect near the ceiling, through-
out the room, preventing areas of cold and hot develop-
ing.
■ ATTENTION
• Always use a remote controller to adjust the flaps angle.
If you attempt to move it forcibly with hand when it is
swinging, the mechanism may be broken.
(13 class only)
In COOL or DRY mode
STOP
COOL
approx. 10˚~40˚
DRY
approx. 5˚~35˚
In FAN mode
STOP
FAN
approx. 5˚~55˚
13