Replacing The Battery - Panasonic TC-65AX800U Ehelp

Hide thumbs Also See for TC-65AX800U:
Table of Contents

Advertisement

Replacing the battery

When the battery is running low, the indicator lamp flashes 5 times on turning
the 3D Eyewear on.
In this case, early battery replacement is recommended.
Dispose of the old batteries as non-burnable rubbish, or in line with the
waste disposal regulations in your local area.
1. Remove the cover
1) Loosen the screw with a precision Phillips (No.0, plus +).
2) Slide the cover using pen tip or screwdriver (minus -), etc.
3) Remove the cover with your finger as shown in the illustration below.
The screw is not removed from the cover.
2. Replace the battery
If difficulty, remove it with the tip of the driver.
Use the specified type of battery (coin-shaped lithium battery CR2025.)
Note the correct polarity (+ or -).
3. Replace and fasten the cover
Tighten the screw.
- 50 -

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tc-58ax800u

Table of Contents