Nokia RM-801 User Manual page 10

Hide thumbs Also See for RM-801:
Table of Contents

Advertisement

10
When power save mode is switched on, you may not be able to change the settings
of certain apps.
Do not attempt to remove the battery from the device. To replace the battery, take
the device to your nearest authorised service facility.
Authorised retail points may also offer a battery replacement service.
Important: Only qualified personnel or an authorised service facility should
replace the battery. Unauthorised battery replacement may invalidate your warranty.
Charge the battery
Your battery has been partially charged at the factory, but you may need to recharge
it before you can switch on your phone for the first time.
You do not need to charge the battery for a specific length of time, and you can use
the phone while it is charging.
If the phone indicates a low charge, do the following:
Charge from a wall outlet
1
First connect the USB cable to the charger, and the charger to the wall outlet,
then connect the USB cable to your phone.
2
When the battery is full, disconnect the charger from the phone, and then from
the wall outlet.
© 2011 Nokia. All rights reserved.

Advertisement

Table of Contents
loading

Table of Contents