Home Decorators Collection HDSS1801 Assembly Instructions Manual page 7

Assembly (continued)
3
Installing the frame
□ Drill pilot holes on the wall at the marked positions
using ø1/8" (2.5mm) drill bit.
4
Installing the frame
□ Except for the holes that are over the stud, drill in
the exisiting holes on the wall using ø5/16" (8mm)
drill bit and insert the wall anchors (D) into the
holes using a rubber mallet until the wall anchors
(D) are flush with the wall.
ø1/8"
2.5mm
7 HOMEDEPOT.COM/HOMEDEPOT.CA/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
D
ø5/16"
8mm