Related Manuals for Atlantic 63607407
Summary of Contents for Atlantic 63607407
- Page 1 Contemporary Tabletop TV Stand for 37”-75” TVs Tilt, swivel and height adjustable Model: 63607407 PRODUCT GUIDE INSTALLATION MANUAL July 11 2021_V1...
-
Page 2: Installation Video
stand (MAX: 600mm/23.62”) (MIN: 200mm/7.87”) Is your TV VESA equal to/greater than 200x200mm (7.87”x7.87”) (MAX: 400mm/15.75”) This TV stand is NOT compatible and equal to/less than (MIN: 200mm/7.87”) 600x400mm (23.62”x15.75”) 88 lbs This TV stand is NOT compatible. (40 kg) 88 lbs (40 kg)? 1/8”... - Page 3 PRODUCT OVERVIEW 25.20” 4.33” min. to 23.82 max. 2.87” 13.50” 35.63” TOP VIEW VESA (Mounting Hole Patterns) 2.56” VESA Patterns Supported 200x200 300x200 300x300 400x200 400x300 400x400 600x400 FRONT This stand capacity of 88 lbs. Do not over tighten screws to avoid any damage or injury. Use with products heavier than the maximum weight indicated or on a sloping surface may result in instability of the stand and its accessories causing possible injury.
- Page 4 Parts List Connecting Foot Vertical Bar Right Crossbars Base Extension Left Cover Cover TV Stand Hardware TV Mounting Hardware M5x14 M6x14 M6x30 M8x30 M8x50...
- Page 5 STEP 1 Assemble TV Stand Assemble Base. Slide on left cover (G) and right cover (H) to the ends of base (E). Connect Foot to Base. Attach foot (B) to base (E) with four screws (K) using larger Allen wrench (S). Connect Arm to Foot.
- Page 6 STEP 2 Assemble TV Bracket Assemble TV Bracket If the distance from the highest VESA hole to the bottom of your TV is greater than 28.85”, an extension bar is required. If so, proceed to Step 2B. If no extension bar is needed, measure the vertical distance between your TV VESA holes and separate the crossbars (D) to match.
- Page 7 STEP 3 Attach TV Bracket to the back of TV Carefully lay your TV on its face on a non-abrasive surface covered with a blanket or soft padding to help prevent damaging the screen. Place TV stand on the back of TV, aligning the mounting holes. 1 3.1 1 3.2 If you don’t need a...
- Page 8 STEP 4 Attach, adjust and lock Stand to TV Attach and secure Stand to TV. Two people must hold the TV. [1] Lift the TV so the hook on the stand is below the connection Vertical Bar latch. [2] Look behind the TV to align the hook and latch to the desired height (5 levels).
- Page 9 STEP 5 Attach Safety Cable to wall Wood Stud - Mark and Drill mounting holes 40mm (1.6") [1] Locate center of studs with a stud ø 3.5mm finder and use a measuring tape. (ø 1/8") [2] Use brackets (O) as templates and mark two holes each with a pencil.
- Page 10 STEP 5 Attach Safety Cable to wall Concrete, Stone or Masonry - Mark and Drill mounting holes 40mm (1.6") [1] Use a measuring tape to mark the ø 7mm center locations for brackets (O). (ø 9 /32") [2] Use brackets (O) as templates and mark four holes as shown.
-
Page 11: Product Warranty
Warranty Product Warranty Thank you for your Atlantic Inc. purchase. This limited warranty covers any defects in material or workmanship for purchases made in the U.S.A. and Canada, and excludes claims from conditions, malfunctions or damage not resulting from defects in material or workmanship. The warranty duration is one year for the original purchaser.