Page 1
TV Wall Mount Item No: 63607068/63607107/63607139 Congratulations on your latest Atlantic purchase. Follow these simple instructions and you’ll have your TV mounted in no time. This kit fits most TVs 37in - 84in. (94cm - 213.4cm), up to 132lbs (60kgs).
Page 3
Parts List Item Components Item Components 2 x 8.66in. (220mm) Velcro Cable Ties Tools Needed (Not Included) 5/16 in. or 8 mm Safety Hammer Wood Drill Bit Phillips Drill Stud Finder Glasses Screwdriver Note: Wood Double Stud before assembly.
Page 4
PLEASE CHOOSE BEST INSTALLATION OPTION BASED ON TV BACK PANEL HOLE SPACING: OPTION 1: 2.95 in x 2.95 in / 75 mm x 75 mm or 3.94 in x 3.94 in / 100 mm x 100 mm This mount is designed to be attached into wood Remove TV mounting plate (B) from wall studs.
Page 5
PLEASE CHOOSE BEST INSTALLATION OPTION BASED ON TV BACK PANEL HOLE SPACING: OPTION 2: (7.87 to 23.6) in x 15.7 in / (200 to 600) mm x 400 mm DO NOT use wall anchors. This mount is designed to be attached into wood studs. Using a stud nder, nd the center of two adjacent studs.
Page 6
Figure 1 Slide TV mounts (C) along with TV horizontal bar (D). See Figure 1. allen wrench (H). Selecting mounting hardware and then using instructions on Page 6 Safety Screws We strongly recommend two people, one on each side, hold the TV. Carefully position the TV over the wall bracket (A) until it locks in place.
Page 7
OPTION 1 OPTION 2 2.95 in x 2.95 in / 75 mm x 75 mm (7.87 to 23.6) in x 15.7 in 3.94 in x 3.94 in / 100 mm x 100 mm (200 to 600) mm x 400 mm TAKE EXTRA CARE AND PAY ATTENTION WHEN YOU FASTEN THE TV MOUNT(S) TO THE BACK TV PANEL IN STEP 3.
Page 8
Product Warranty: Atlantic Inc., warrants to the original purchaser that its products are free from defect in materials and workmanship. If after inspection, we nd that the product was defective in materials or workmanship we shall repair or replace the product at our discretion.
Need help?
Do you have a question about the 63607068 and is the answer not in the manual?
Questions and answers