Table of Contents
Advertisement
ENG
Parts
The actual product may differ
slightly from the illustration.
Middle Cabinet
(Wall Mount Only)
Speaker Dust Cover
Screw
: 2EA
Installing the Speakers
Speakers
2 EA
1 EA
1 EA
Speaker Cable
Screws
Screw
: 6EA
58
(continued)
This speaker installation guide is for the 5040 Model.
How to Assemble the Speakers(Standing)
Remove the screws indicated on the rear of the PDP (6 screws on the
left and right sides).
Set the Speaker Guide Bracket into the square grooves located on
either side of the PDP's bottom rear then push the Speaker Guide
Bracket towards the center (as the arrow illustrates). Secure the
Speaker Guide Bracket with provided screws . (Always use the
proper screws, as indicated.)
Screw
Secure the Speaker Dust Cover by setting it into the grooves
located on the front side of the speakers.
Connect the speakers to the PDP using the speaker cable.
The connection terminals are on the rear side of both the PDP and
the speakers. (Match the color coded terminals and cables.)
BLACK
BLACK RED
WARNING
1. When moving the PDP with the speakers attached, be sure to hold on to the PDP
to prevent damage. (Damage may occur to the speaker connecting brackets or the
speakers.)
2. Speakers of 8Ω Impedance, 15W Nom. Power, 30W Max. Power is recommended.
3. To connect the subwoofer speaker (sold separately), use the woofer output
terminal on the rear side of the PDP.
RED
Advertisement
Table of Contents
