Table of Contents
Advertisement
Switching On and Off
The mains lead is attached to the rear of your PDP.
1
Plug the mains lead into an appropriate socket.
Result:
The Standby indicator on the front of the PDP lights up.
The main voltage is indicated on the rear of the PDP and
the frequency is 50 or 60Hz.
2
Press the " I /
" button on the front of the PDP (or POWER (
button on the remote control) to switch the PDP on.
Result:
The programme that you were watching last is
re-selected automatically.
If you have not yet stored any channels, No clear picture
appears. Refer to "Storing Channels Automatically" on page
18 or "Storing Channels Manually" on page 19.
3
To switch your PDP off, press the " I /
Placing in Standby Mode
Your PDP can be placed in Standby mode, in order to reduce the
Power consumption.
The Standby mode can be useful when you wish to interrupt
viewing temporarily (during a meal, for example).
1
Press the POWER (
Result:
The screen is turned off and the Standby indicator on
the front of the PDP lights.
2
To switch the PDP back on, simply press the POWER (
again or a numeric button.
You can also switch on by pressing the P
" button again.
) button on the remote control.
or
)
) button
button.
Front of the PDP
TV
TV
13
ENG
Advertisement
Table of Contents
