3Com Router 3000 Series Manual page 11

Changes to 3Com Router Commands
The software in the 3Com routers is a subset of the commands used in other 3Com products.
Depending on the capabilities of your hardware platform, some commands described in the 3Com
Command Reference Guide may not be available on your router, although the unavailable commands
may display on the command line interface (CLI).
CAUTION: Any command that displays on the CLI, but is not described in the 3Com
Command Reference Guide, is not supported in the V1.20 software. 3Com only supports the
commands that are described in 3Com Command Reference Guide or are updated in these Release
Notes. Other commands may result in the loss of data, and are entered at your own risk.
System Management
Enable Reverse Telnet Connection
Operation
Enable the option negotiation towards the
Telnet client
Disable the option negotiation towards
the Telnet client
Enable the function of Break-On-Ip of
Telnet
Disable the function of Break-On-Ip of
Telnet
Configure X.25 PAD Remote User
Operation
Enable the AAA authentication of the
X.25 PAD Server end
Disable the AAA authentication
Network Protocol
Display and Debug IP Performance
Operation
Reset the information on IP statistics
counters
3Com Router Release Notes for V1.20
Previous Command
terminal- telnet refuse-negotiation
undo terminal-telnet refuse-
negotiation
terminal-telnet break-on-ip
undo terminal-telnet break-on-ip
Previous Command
login pad
undo login pad
Previous Command
reset ip counters
11
New Command
reverse-telnet refuse-negotiation
undo reverse-telnet refuse-negotiation
reverse-telnet break-on-ip
undo reverse-telnet break-on-ip
New Command
login-method authentication-mode pad
scheme name
undo login-method authentication-
mode pad
New Command
reset ip statistics