Related Manuals for Avigilon NVR5-VAL-6TB
Summary of Contents for Avigilon NVR5-VAL-6TB
- Page 1 User Guide Avigilon NVR5 Value NVR5-VAL-6TB, NVR5-VAL-12TB, NVR5-VAL-16TB, NVR5-VAL-24TB...
- Page 2 © 2023, Avigilon Corporation. All rights reserved. AVIGILON, the AVIGILON logo, AVIGILON CONTROL CENTER and ACC are trademarks of Avigilon Corporation. Other names or logos mentioned herein may be the trademarks of their respective owners. The absence of the symbols ™ and ® in proximity to each trademark in this document or at all is not a disclaimer of ownership of the related trademark.
-
Page 3: Table Of Contents
Install the Bezel Configure the Operating System Logging into Windows 10 for the First Time Activate the ACC Software and Connect to Avigilon Cloud Services Activate ACC Software and Feature Licenses Connect to Avigilon Cloud Services (Optional) Activating a License... - Page 4 Network Link Status Indicators Hard Drive RAID Status Indicators System Health and Identification Modes Resetting the iDRAC System For More Information Product User Guides...
-
Page 5: Introduction
Introduction The Avigilon NVR5 Value is preloaded with the Avigilon Control Center software and is configured for maximum performance and reliability. The NVR5 Value can be easily integrated into any existing Avigilon security system, or act as the base of a new site. -
Page 6: Overview
Provides access to hot-swappable hard drives. The LED indicators on each hard drive caddy indicate the status of the hard drive. The NVR5-VAL-6TB, NVR5-VAL-12TB, NVR5-VAL-24TB models are equipped with four hard drives. The NVR5-VAL-16TB is equipped with three hard drives. -
Page 7: Back View
6. Keyboard port and mouse port Accepts connectors to a keyboard and mouse. Package Contents Ensure the package contains the following hardware: Avigilon NVR5 Value ReadyRails 1U/2U Static Rails For 2/4-Post Racks Bezel and key Power cables C13 / C14 ... -
Page 8: Installation
Installation Connect the Cables and Power On Refer to the diagrams in the Overview section for the location of the different connectors. Make the following connections as required: 1. Connect a KVM switch or separate keyboard, mouse and monitor to the recorder. The keyboard and mouse can be connected to any USB port on the recorder. -
Page 9: Configure The Operating System
It is highly recommended to create a second Administrator user as a backup. 5. You are logged in to the Windows environment. The Avigilon Control Center Admin Tool and the ACC Client automatically start up. -
Page 10: Activate The Acc Software And Connect To Avigilon Cloud Services
You can start to back up the system settings for your new site in the ACC Client software after it is configured. These settings include the ACC password, and the settings for the camera connections. For more information on backing up the site and server configurations, see the Avigilon ACC Client User Guide. Activating a License Once your license is activated, you can immediately use the new licensed features. -
Page 11: Online Activation
6. Click Save File… and choose where you want to save the .key file. You can rename the file as required. 7. Copy the .key file to a computer with internet access. In a browser: 1. Go to activate.avigilon.com. 2. Click Choose File and select the .key file. 3. Click Upload. A capabilityResponse.bin file should download automatically. Online Activation... -
Page 12: Reactivating A License
If not, allow the download to occur when you are prompted. 4. Complete the product registration page to receive product updates from Avigilon. 5. Copy the .bin file to a computer running the ACC Client software. In the ACC Client: 1. -
Page 13: Troubleshooting
You can monitor the health of the system components in the Site Health page in either the ACC Client software or Avigilon Cloud Services (ACS). See the Help files provided with the ACC Client software, the Avigilon ACC Client User Guide, or the Avigilon ACS Client User Guide available from the Avigilon website for more information. -
Page 14: Operating System Recovery By External Usb
Allow up to half an hour for the recovery to complete. 5. After system reboot, complete the Windows setup process. 6. Navigate to C:\Avigilon\Control Center Installation Files, and run the ACC installer for the version of ACC software in use at your site. -
Page 15: Maintenance
Maintenance Checking System Health You can check your system health through the ACC Client Site Health or with the Server Administrator software. ACC Client Site Health You can check on the health of the system components in the Site Health in the ACC Client software. See Site Health in the ACC Client User Guide for more information. -
Page 16: Replacing Hard Drives
settings, assign a hot spare and remotely monitor the system health. For more information about the features in the Server Administrator, see the Help system provided in the software. Replacing Hard Drives Guidelines When replacing hard drives, observe the following general guidelines: If only one drive is used, install the drive in the drive bay with the lowest device number. - Page 17 6. Insert a new hard drive into the carrier then screw it into place. The hard drive connectors should face the back. 7. When the hard drive is secured in the carrier, insert the hard drive back into the recorder. 8.
-
Page 18: Led Indicators
Steady amber — The system is in fail-safe mode. Note: If the system health indicates a degraded or critical state, System health and contact Avigilon Technical Support for assistance. System ID Blinking amber — The system is experiencing a fault. Check the System Event Log. -
Page 19: Idrac Direct Led Indicators
LED Indicator Description Steady amber — An electrical error has occurred. Possible errors include: Electrical Voltage out of range Failed power supply Voltage regulator Check the power status indicator to confirm if it is an issue with the power supply, and reset the power supply unit, if the error persists. Steady amber —... -
Page 20: Network Link Status Indicators
Figure 5: (1) The power status indicator. LED Indicator Description Power is not connected. Green Power is supplied. Network Link Status Indicators When the recorder is connected to the network, the recorder’s connection status LEDs above the Ethernet port display the recorder’s connection status to the network. The following table describes what the LEDs indicate: Figure 6: (1) Link LED. -
Page 21: System Health And Identification Modes
Figure 7: (1) Status LED. (2) Activity LED. The Activity LED flashes green when the hard drives are working. The following table describes what the Status LEDs indicate: LED Indicator Description Green The hard drive is online. The hard drive is ready for removal from the recorder. Note: The indicator remains off until all drives are initialized after the system is turned on. -
Page 22: Resetting The Idrac System
For information about using the iDRAC web interface to perform the reset, see the Enabling iDRAC Enterprise Features Setup Guide. Limited Warranty Avigilon warranty terms for this product are provided at avigilon.com/warranty. Resetting the iDRAC System... -
Page 23: For More Information
For More Information For additional product documentation and software and firmware upgrades, visit support.avigilon.com. Technical Support Contact Avigilon Technical Support at support.avigilon.com/s/contactsupport. Product User Guides For product user guides, visit the Downloads page: NVR: https://www.avigilon.com/support/infrastructure/nvr-downloads For More Information...