4-6. Caravan Connect Feature
Press and hold the '+' button for 6 seconds and release after the second beep.
4-7. Restore Factory Settings
Turn off the monitor. Then turn the monitor back on and 'within' 3 seconds,
press and hold the 'set' button and release after the beep.
5. INSTALLATION TIPS
1. Please fully charge the unit before first time use.
2. Before installing the wheel sensors turn on the monitor and make sure you
have cold tyre pressures before installation of the wheel sensors.
3. Due to air expansion and contraction, tyre pressures and temperatures will
change whilst driving.
4. All sensors in this unit have been pre-set individually for each tyre in the
factory. Whenever the location of a tyre is changed it is necessary to put the
numbered sensor back to its original position as per the factory default wheel
sensor location.
5. When installing the monitor on the dash, ensure it is placed securely and does
not obstruct the driver's view of the road.
10
Need help?
Do you have a question about the IC005 and is the answer not in the manual?