ENG
Rear of TV (Option)
( MONO )
VIDEO
L-AUDIO-R
AUDIO OUT
VIDEO OUT
(L)
(R)
Side of TV
R
I
AUDIO
I
L
(MONO)
VIDEO3
INPUT
S-VIDEO2
INPUT
AUDIO OUT
VIDEO OUT
(L)
(R)
Video Connections
75Ω
AV-2
VHF/UHF
AV-1
S-VIDEO1
RGB
VCR
75Ω
MONITOR
-OUT
AV-2
VHF/UHF
S-VIDEO1
AV-1
VCR
VCR
8
1
Connect an optional AUDIO/VIDEO cable from the VIDEO OUT jack on
the rear of the VCR to the VIDEO IN jack on the rear of the TV.
2
Connect another optional audio/video cable from the AUDIO OUT jacks on
the rear of the VCR to the AUDIO IN jacks on the rear of the TV.
◆
If you have a VCR with 21 pin scart jack, connect scart cable to the
rear of TV (Option).
3
Press the TV/VIDEO button to select "AV".
◆
As you press the button, TV, AV1, AV2, AV3, S-VIDEO1, and
S-VIDEO2 are repeated alternately.
TV ➞ S-VIDEO1 ➞ S-VIDEO2 ➞ AV1 ➞ AV2 ➞ AV3
if connected
4
Playback a tape in the VCR.
(See owner's Manual for VCR)
☛
Self Checkup Function
◆
When all front and rear jack of this TV are
disconnected, the video mode changes as below.
➞
TV
AV3
(When only AV1 Jack is connected)
➞
TV
AV1
☛
TV/Video Selection
◆
Press the TV/VIDEO button repeatedly to select the
desired input.
◆
Whenever the TV/VIDEO button is pressed, the mode
changes as below.
➞
TV
S-VIDEO1
(when all input jacks are connected)
➣
◆
When video mode is selected and that AV mode has no
input picture signal, the background colour of the TV
screen will change to blue regardless of whether the
BLUE-SCREEN function is set.
◆
Teletext displays on screen will not be output at the
Monitor output terminal and Scart output terminal.
◆
AV mode isn't selected when VCR wasn't operating, so you
must check VCR status before selecting AV mode.
➞
S-VIDEO2
➞
➞
AV3
AV2
AV1