ENG
-/--
S.STD SURROUND S.MODE
P.STD
VOL
Menu
Picture
Sound
Time
Setup
Function
PinP
Sel.
Enter
Picture
100 Contrast
50 Brightness
50 Sharpness
50 Colour
Sel.
Adjust
Contrast
Picture Adjustment
0
P/C
P.SIZE
MENU
VOL
CH
100
22
(cont.)
You can sequentially select and adjust one of five picture levels.
◆
Contrast, Brightness, Colour, Sharpness or Tint (NTSC only)
e.g. Contrast Adjustment.
1
Press the MENU button. Move to "Picture" option by pressing the CH▲ or
CH▼ buttons and press the VOL+ or VOL– buttons.
2
Move to "Contrast" by pressing the CH▲ or CH▼ buttons and press the
VOL+ or VOL– buttons.
3
Adjust 100 "Contrast" by VOL+ or VOL– buttons.
4
When you have finished contrast adjustment, press Menu repeatedly until
the menus disappear.
➣
In the circumstances of colour broadcasting, the colour
does not disappear completely even if you minimize the
colour control level.
Picture Size Adjustment (
Press this button to change picture size.
◆
Plus ➞ Normal ➞ 16:9 ➞ Zoom
( Normal ➞ 16:9 ➞ Zoom ; 34", 37" )
Normal ➞ Plus mode (extra 1 inch)
Plus
Normal
Aspect ratio 4:3
Normal ➞ 16:9 size
16:9
16:9 ➞ Normal size
Zoom
➣
◆
In Zoom mode, the picture display will temporary revert
to Normal mode for OSD display. The picture display
returns to the Zoom mode when the OSD disappears
(MENU, PIP, DISPLAY, TTX).
◆
Guide sentence reads "Not available".
Each press of the "P.SIZE" button for change the picture
size in status of "PIP ON".
◆
When we watch the TV, pictures can be cut on is left or
right or left & right side according to the signal from
broadcasting station. Then we ought to watch on
"Normal" size by using "P.SIZE" button.
P.SIZE
P.SIZE
)