Changing The Picture Standard; Adjusting The Picture Settings - Samsung CS29A200 Owner's Instructions Manual

ENG
Adjust
Scan mode
Digital NR
Tilt
Size
Move:
Color tone
Brightness
Color
Contrast
Sharpness
Move: Sel.:
26

Changing the Picture Standard

Adjusting the Picture Settings

Picture
Custom
Natural scan
Off
0
16:9
Enter:
Adjust(Custom)
Normal
Store:
You can use your remote control to select the type of picture which
best corresponds to your viewing requirements. The following
picture effects are available:
Custom, Standard, Sports, Mild, Natural.
To select the required picture effect, simply press the P.STD button
( ) on the remote control.
You can also set these options via the Adjust option in the
Picture group. If you change the Color tone, Brightness,
Color, Contrast, Sharpness or Tint (NTSC only) settings on
the Picture menu, the Custom option is selected automatically.
Your television has several settings which allow you to control
picture quality:
Color tone, Brightness, Color, Contrast, Sharpness,
Tint (NTSC only)
1
Press the MENU
Result: The options available in the Picture group are
displayed.
2
Move the joystick right.
Result: The Adjust option is selected.
3
Move the joystick right again.
Result: The Adjust menu is displayed with the current option.
4
Move the joystick up or down to select the option to be adjusted.
5
To change the...
Color tone
Brightness
Color
Contrast
Sharpness
Tint (NTSC only)
6
When you are satisfied with the settings, press the joystick button
( ) to store them.
7
When you have finished, press the TV button (
normal viewing.
button.
Then move the joystick...
right until the required option
(Normal, Warm1/2 or Cool1/2)
is displayed.
right.
Result: A horizontal bar is displayed.
left or right until you reach the setting.
) to return to