Advertisement
Quick Links
General Hot-Shot
™
Operating Instructions
Model CHS-300
(For use with Copper and Iron Pipe
1/2" to 1-1/2" size, up to 100' long)
Y
our Hot-Shot is designed to give you
years of trouble-free, profitable service.
However, no machine is better than its
operator. We therefore suggest you read
these instructions through carefully before
using your machine on the job. This will
enable you to operate the Hot-Shot more
efficiently and more profitably. Failure to
follow these instructions may cause
personal injury to operator or damage to
equipment.
SAVE THESE INSTRUCTIONS!
Advertisement
Related Manuals for General Pipe Cleaners General Hot-Shot CHS-300
Summary of Contents for General Pipe Cleaners General Hot-Shot CHS-300
- Page 1 General Hot-Shot ™ Operating Instructions Model CHS-300 (For use with Copper and Iron Pipe 1/2" to 1-1/2" size, up to 100' long) our Hot-Shot is designed to give you years of trouble-free, profitable service. However, no machine is better than its operator.
- Page 2 Hot-Shot™ Safety Instructions modify the plug in any way. Do not use any adapter plugs. Check with UL approved tester or a qualified electrician if you are in WARNING doubt as to whether the outlet is properly grounded. If the tool should electrically malfunction or break down, grounding provides Machine must be plugged a low resistance path to carry electricity away...
- Page 3 Hot-Shot™ 2. Dress properly. Do not wear loose clothing Introduction or jewelry. Contain long hair. Keep your A frozen water pipe can be thawed very quickly by hair, clothing, and gloves away from moving passing low voltage high current electricity through parts.
- Page 4 Hot-Shot™ usually be in the outside walls, near doors, Some Common Problems windows and in crawl spaces under floors. If all 1. Cables stay cold. Pipe does not thaw. the water outlets in the house fail to operate, • Do you have power? Check fuses. the line from the curb valve to the house is •...