Jet-set for 1-1/2” to 3” lines up to 50 ft. long (8 pages)
Summary of Contents for General Pipe Cleaners JM-1000
Page 1
Jet-Set Mini-Jet Operating Instructions For 1-1/2” to 3” lines up to 50 ft. long Your JM-1000 Jet-Set electric water jet is designed to give you years of trouble- free, profitable service. However, no ma- chine is better than its operator.
Jet-Set JM-1000™ GENERAL SAFETY RULES 9. DO NOT touch plugs or tools with wet hands. Reduces the risk of electric shock. WARNING GROUND FAULT CIRCUIT INTERRUPTER (GFCI) Read and understand all instructions. Failure to follow all in- Your machine is equipped with a ground fault circuit interrupter, which structions listed below may result in electric shock, fire, and/or protects you against shock if a short circuit should occur.
Page 4
AUTOMATIC UNLOADER without water will cause the pump to fail and void the warranty. The JM-1000 Mini Jet is equipped with an Automatic Unloader to pro- 6. Check for worn hose and components before each use. tect the pump. It prevents pressure overload in the event that the noz- Check that all fittings are secured before using jet.
Jet-Set JM-1000™ JET ASSEMBLY Upon arrival, inspect the shipping carton for damages. Unbox and Powerful penetrating nozzle cuts examine all parts. Note any damage to machine or components through grease and ice. for claims against freight carrier. Jet machines are meant to be used at or near the working area ...
Remember to remove the nozzle from debris to flow away easily. the jet hose. 10. The JM-1000 includes full time Pulse. The vibration generated helps to hose overcome the friction in the line and glide farther down the line. See Pulse section.
Jet-Set JM-1000™ TROUBLE SHOOTING GUIDE Problem Probable Cause Solution Low pressure. Worn, clogged, or oversized nozzle. Clean or replace worn nozzle. Check nozzle size. Clogged water inlet strainer. Clean or replace strainers. Inadequate water supply. Make certain water supply valve is on fully. Make certain water supply hose is at least 5/8”...