Advertisement
The door lock of your machine will automatically release about two minutes after the
programme has finished. You can open the door and take out the laundry by pulling
the door handle towards yourself.
After you have taken out the laundry leave the door open so that the machine interior
can dry.
Unplug the machine.
Turn off the water tap.
CANCEL A RUNNING PROGRAMME/SELECT A NEW PROGRAMME
If you want a certain programme in progress to finish early:
Press the start/pause button.
Turn the programme knob to STOP (Off / "O") status.
Turn the programme knob to "Draining" or "Spinning" programs.
The programme ready light will be on.
Run the program you have selected by pressing the start/pause button.
CHILD LOCK
Your machine is equipped with a child lock in order to prevent a programme's
operation from being affected by a push on a button during a wash operation. The
child lock will become active after pressing the first and third button from the left
simultaneously and for at least three seconds while a programme is running.
You can verify the activation of the child lock by checking lamps of the operation
buttons which will flash for two seconds. In order to deactivate it you will have to press
the same buttons at the same time. You can check whether it is deactivated by
checking out the start/pause lamp which will flash.
AUTOMATIC FAILURE DETECTION SYSTEM
Your machine is equipped with systems which will both take the necessary
precautions and warn you in case of any failure by controlling itself constantly during
the washing processes.
When a failure condition is detected, the "start/pause", "programme ready",
"programme end" lights blink according to a codification that identifies the failure
causes.
Refer to the "Troubleshooting Guide" in your Instructions for Use for the failure codes
and contact your After-Sales Service.
All manuals and user guides at all-guides.com
Advertisement
