Advertisement
Press and hold both the UP footswitch and the REVERB footswitch while turning on power,
release both footswitches when you see all the indicators on the NUX Trident turns on. The
prompt message "(No device found)" will change to "NUX - Trident - Device connected. ",
meanwhile the display on Trident shows
2. Select the new firmware file(.bin) and start upgrading the firmware.
Select the new firmware file, the file name varies depending on the firmware version. However,
the file extension will always be '.bin'.
WARNING:
Please make sure that the selected firmware file is actual for the NUX Trident, Otherwise,
you may brick your pedal or cause it to malfunction.
Do NOT disconnect or power off the NUX Trident during the upgrade.
After the firmware is selected, click "Start Update" to continue.
.
Advertisement
