Page 1
Kidney Bridge Operator’s Manual Table of Contents Introduction .......... 2 Component .......... 4 Instructions for use ......5 Maintenance/Inspection ...... 6 Specifications ........7 This product is designed for medical operations. Using this product for any other purpose other than this intended use may cause serious injury.
Page 2
If these indications are ignored and the product is incorrectly used, injury and/or damage to property may result. • This product is only validated for use with Mizuho operating tables. • When working with an operating table, take care not to allow this product to make contact or interfere with the tabletop or with other tools and appliances used in combination with this product.
Page 3
Component The components of this product are as follow. Component Material ① Handle Stainless steel ② Interlocking shaft Stainless steel ③ Gear box Stainless steel ④ Kidney bridge Polyurethane ⑤ Support pole Stainless steel ⑥ Rail clamp Stainless steel...
Page 4
Instructions for use The following describes how to attach, detach and operate this product. 1. Attach the kidney bridge④ to the support poles⑤ adjusting the width. (532 mm or 582 mm). 2. Attach the gear boxes③ to the side rails of the operating table. 3.
Page 5
4-4. Warranty • MIZUHO Corporation will repair defective parts of this product without charge for one year from the date of delivery / installment except for cases of damage caused by a third party’s repair, act of nature, improper use or intentional damage. All other warranty terms and conditions are subject to regulations of MIZUHO Corporation.
Page 6
Unit: mm Dimension of Weight Code No. Product Description Component attachable side rail (kg) Thickness x Height (mm) 08-096-02 Kidney Bridge with Pad ①〜⑥ 9×32 Temperature 10 to 40 °C ( 50 to 104 °F) Operating Humidity 30 to 75 %...
Need help?
Do you have a question about the 08-096-02 and is the answer not in the manual?
Questions and answers