Advertisement
Water tank needs to be
Small amount of
emptied.
water in the drum
at end of cycle
Environmental conditions
may be affecting dryer
operation.
Dryer is overloaded.
Dryer has a fault.
Dryer Has not been
levelled properly.
Dryer makes unfamiliar
noises.
Dryer is not installed on
a stable surface.
Dryer is not level.
Dryer is overloaded.
Cycle selection not
appropriate for the load.
Dryer is overloaded.
Dry Level selected too
high for load type.
White/light and coloured
items not separated before
drying.
Wet items left sitting in the
dryer for long periods of
time before drying.
11
Refer to 'Emptying the water tank'.
If conditions are particularly hot,
humid or cold, it is possible vaporised
water may re-condense in the drum
or on the inside of the door.
Remove some items from the dryer.
Continuous beeping or a musical
series of beeps with a message
displayed on the display.
Refer to 'Fault codes'.
Adjust the adjustable foot under the
dryer. Refer to 'Levelling the dryer'.
At the start of the cycle the dryer
may make some unfamiliar noises
when the compressor turns on. T
his is normal.
Ensure the dryer is installed on a flat,
stable surface.
Ensure the dryer is correctly levelled.
Remove some items from the dryer.
Choose appropriate cycle.Refer
to'Dry Cycles'
Remove some items from the dryer.
Try selecting a lower Dry Level.
Remember to separate white/light
and coloured items before placing
them in the dryer.
Refer to 'Sorting' for tips to prevent
dye transfer.
Advertisement
