Table of Contents
Advertisement
Using the Configuration Menu (continued)
Advanced > Performance>802.11a (continued)
Super Mode with
Dynamic Turbo-
Super Mode with
Static Turbo-
Radio Wave-
Wireless Band-
IEEE802.11g is selected.
Frequency-
The frequency is 2.437GHz.
Channel-
The default channel is 6.
Data Rate-
Select the transmission rate for the
network. The default is Auto.
Beacon Interval-
DTIM-
Fragment
Length-
All manuals and user guides at all-guides.com
Capable of Packet Bursting, FastFrames, Compression, and
Dynamic Turbo. This setting is backwards compatible with non-
Turbo (legacy) devices. Dynamic Turbo mode is only enabled
when all devices on the wireless network are configured with
Super Mode with Dynamic Turbo enabled.
Capable of Packet Bursting, FastFrames, Compression, and
Static Turbo. This setting is not backwards compatible with non-
Turbo (legacy) devices. Static turbo mode is always on and is
only enabled when all the devices on the wireless network are
configured with Super Mode with Static Turbo enabled.
Select ON or OFF.
Advanced > Performance > 802.11g
Beacons are packets sent by an access point to synchronize
a network. Specify a beacon interval value. The default (100)
is recommended.
(Delivery Traffic Indication Message)- DTIM is a countdown
informing clients of the next window for listening to broadcast
and multicast messages.
The fragmentation threshold, which is specified in bytes, determines
whether packets will be fragmented. Packets exceeding the 2346
byte setting will be fragmented before transmission. 2346 is the
default setting.
19
Advertisement
Table of Contents
