Samsung SyncMaster 210P PLUS User Manual page 13

Connecting
Your Monitor
Installing the
Monitor Driver
Base Installation
1. Connect the power cord for your monitor to the power port on the back of the monitor.
2. Connect the signal cable to the 15-pin D-sub connector on the back of your monitor. Connect
3. If you are using a Macintosh computer, connect the cable to a Macintosh adapter, and set the
4. Connect the signal cable to the BNC signal port on the back of your monitor/computer.
5. Turn on your computer and monitor. If your monitor displays an image, installation is complete.
Plug the power cord for the monitor into a nearby outlet.
the signal cable to the video port on your computer, video board, video card, or graphics card.
pins on your adapter(Adapter not included). A PC-compatible computer does not need an
adapter.
Main > Setup > Connecting Your Monitor