Haier HWD1050AN1 User Manual page 24

Table of Contents

Advertisement

9-Care and cleaning
9-6
9-8
9-10
9-12
24
9.5 Long periods of disuse
9-7
If the appliance is left idle for a longer period:
1. Pull out the electrical plug (Fig. 9-6).
2.
3. Open the door to prevent formation of moisture
Before next usage check carefully power cord, water
inlet and drain hose. Make sure everything is properly
installed and without leackage.
9
9-9
for instance if the appliance:
hot! Before any action please ensure water has
9-11
cooled down.
1.
2.
3. Provide a
4. Pull the drainhose out and hold its end above the
9-13
5. Take the sealing plug out of the drainhose (Fig.
6. After complete drainage close drainhose (Fig.
7. Unscrew and remove counter clockwise the pump
8. Remove contaminants and dirt (Fig. 9-13).
and odours. Let door open while not used.
Doesn´t drain the water.
Doesn´t spin.
Cause unusual noise while running.
WARNING!
at container to catch leach water
(Fig. 9-10). There could be bigger amounts!
container (Fig. 9-10).
9-10).
9-11). and push it back into the machine.
9
NZ AU
9-7
9
(Fig. 9-9).

Advertisement

Table of Contents
loading

Table of Contents