Table of Contents
Advertisement
Heating Mode (Heat pump model only)
It supplies warm air to the room.
What is the three-minute delay function?
It provides time for the product to blow out hot air. The delay is to protect the compressor.
When the compressor starts running after three minutes, hot air will be blown in the room
for heating.
NOTE
!
• Heating mode only operates at the cooling and heating model.
• Heating doesn't operate at cooling exclusive model.
• Common - Setting Temp Range : 16 °C~30 °C (60 °F~86 °F)
• Egypt Only - Setting Temp Range : 16 °C~28 °C (60 °F~82 °F)
OPERATING INSTRUCTIONS
|
Press the
key to run the machine, then
1
press the
key to select the heating mode.
Set the desired temperature to be higher than
2
the current room temperature.
Pressing the button once will increasethe
desired temperature by 0.5 °C or 1 °C
Pressing the button once willdecrease
the desired temperature by 0.5 °C or
1 °C
- Temperature setting range:
16 °C ~ 30 °C (60 °F ~ 86 °F)
- If the set temperature is lower than the
current room temperature, the heating
function will not be turned on.
If pressing the mode button at run time, the
3
operation mode will be changed into cooling,
dehumidification, heating, automatic operation
or air supply modes.
|
Pressing the
key can stop the heating mode.
4
11
Advertisement
Table of Contents
