Listening To Radio; Presetting Stations - Samsung MM-KC10 Instruction Manual

Listening to Radio

You can listen to the chosen band (FM, AM broadcast stations) by using either the automatic or manual tuning
operation.
Remote Control Unit
2
1
Press TUNER/ Tune in to the
BAND button. desired station.
• Automatic Tuning 1
The selection toggles back and
➝
forth between "FM AM" each
time the TUNER(BAND)
button is pressed.
Automatic Tuning 2
Manual Tuning
frequency incrementally.
Main Unit
Press the TUNER
1 2
Select a broadcast
button to select the
station.
desired band (FM,
AM).
Automatic Tuning
MANUAL and then press and hold
preset station.
Manual Tuning
press
higher frequency.
Press MO/ST button to listen in Mono/Stereo.
(This applies only when listening to an FM station.)
•
Each time the button is pressed, the sound switches between "STEREO" and "MONO".
63
•
In a poor reception area, select MONO for a clear, interference-free broadcast.
Press button to
select the preset station.
Press and hold TUNING button
to automatically search the band.
Briefly press TUNING button to
increase or decrease the
Press the STOP ( )
button to select
button to select the
Press STOP ( ) to select
MANUAL and then briefly
to tune in to a lower or

Presetting Stations

You can store up to:
• FM
15 FM stations
• AM
15 AM stations
Example: Presetting FM 89.1 in the memory
Press the
1
TUNER(BAND)
button and select
the FM band.
•
Each time the button is pressed,
the band switches between
"FM ➝ AM".
kHz
MHz
3
Press the TUNER
MEMORY button.
•
"PROGRAM" flashes in the
display.
PROGRAM
kHz
MHz
To tune in to a preset station, press
remote control to select a channel.
Frequency Modulation
Medium Wave
2
Press TUNING to
select "89.10".
•
Refer to Step 2 on page 63 to
automatically or manually tune in
to a station.
kHz
MHz
4 Press to
select preset
number.
•
You can select between 1 and
15.
PROGRAM
kHz
MHz
on the
64