Table of Contents
Advertisement
MM-J4-RDS(GB)
9/15/04 15:03
Page 10
Setting the Clock
GB
our system is equipped with a clock which allows you to turn
your system on and off automatically.
You should set the clock:
When you first purchase the micro-component system
After a power failure
After unplugging the unit
For each step, you have a few seconds to set the required
options. If you exceed this time, you must start again.
1
Switch the system on by pressing Standby/On (
)
2
Press TIMER /CLOCK twice.
Result: CLOCK is displayed.
3
Press PROGRAM /SET.
Result: The hour flashes.
4
To...
Press...
Decrease the hours ..............................................
Increase the hours ..............................................
5
When the correct hour is displayed, press PROGRAM /SET.
Result: The minutes flash.
6
To...
Press...
Decrease the hours ..............................................
Increase the hours ...............................................
7
When the correct time is displayed, press PROGRAM /SET.
Result: The clock starts and is displayed, even when the system is in
standby mode.
You can display the time, even when you are using another
function, by pressing TIMER /CLOCK once.
SLEEP
EQ/S.BASS
TAPE SPEED
POWER SOUND
DISPLAY
RDS
MUTE
CD
2
1
TUNER
TIMER/CLOCK
TIMER ON/OFF
BAND
VOLUME
TUNING
AUX
PROGRAM/SET
REP. A B
MO/ST
REPEAT
SLEEP
EQ/S.BASS
TAPE SPEED
4,6
3,5,7
POWER SOUND
DISPLAY
RDS
PTY
TA P E
4,6
CD
Listening to a Compact Disc
Do not use CDs of irregular shapes like heart or octagon shapes.
The performance of the player may be degraded.
1
Press the CD(
)button on the main unit and select CD.
2
Open the CD door by pushing on the top of the main unit marked
PUSH OPEN (
).
Result: The CD door is opened.
3
Place the CD on the compartment so that the CD label faces upward.
4
Close the CD door.
Result: Number of tracks and the total playback time are shown on
the display.
5
Press the CD(
) button to playback.
10
6
Adjust the volume according to needs with the following procedures.
Press the VOLUME+,- button or turn the VOL. + or – knob .
7
If it is desired to pause while the playback is processing, press the
CD(
) button.
Press the CD(
) button once again to play back again.
8
To stop playback, press the Stop (
) button.
.
1,5,7
8
Selecting a Track
You can select the track you wish to listen to, either when the
compact disc player is stopped or when a disc is playing.
To start playback at the beginning of the...
Next track .....................................................................
Current track .................................................................
Previous track ................................................................
Track of your choice ......................................................
PTY
CD
TUNING
MODE
+10
TUNING
VOLUME
Searching for a Specific Music
Passage on a CD
When listening to a compact disc, you can quickly search for a
specific music passage on a track.
To search through the tracks...
Press and hold down...
Forwards .........................................................
for at least one second
Backwards .........................................................
for at least one second
It is recommended that you turn the volume down before using
this function.
CD
VOLUME
TUNING
CD Repeat Function
You can repeat:
A specific track on a compact disc
All tracks on the compact disc
1
Press the REPEAT button.
To repeat the...
Current track indefinitely..................... Once (REPEAT 1 is displayed)
Disc ....................................................Twice (REPEAT ALL is displayed)
2
When you wish to stop the Repeat function, press REPEAT a third time.
Result:REPEAT is no longer displayed and the function is cancelled.
6
REPEAT
Press...
once
REPEAT A-B Function
once
twice
or
the
appropriate number of
When you select CD(TAPE) REPEAT A
times.
passages to which you were listening are repeated 3 times.
1
Press CD(
) or TAPE button.
Result:The CD(TAPE) player starts playing.
2
Press REPEAT A
Result:The indications appear: START
The flashes appear: A
A Time is memorised.
3
Press REPEAT A
Result:The indications appear: END
B Time is memorised.
Your selected passages are repeated 3 times.
4
When you have finished the Repeat playback,
Press REPEAT A
2,3,4
1
Programming the Order of Playback
You can decide for yourself:
The order in which you listen to the tracks
The tracks to which you do not wish to listen
This feature can be combined with the CD Repeat function.
1
If necessary, stop the player by pressing Stop ( ).
Press REPEAT...
2
Press PROGRAM / SET.
Result:
3
Select the required track by pressing the SKIP buttons:
to move forwards through the tracks
to move backwards through the tracks
4
Press PROGRAM / SET.
Result:
5
To select other tracks, repeat Steps 3 and 4.
You can programme up to 24 tracks.
VOLUME
TUNING
6
When you have finished selecting the tracks, press CD (
TUNING
listening to the selection, in the order in which the tracks were
MODE
programmed.
+10
7
Press Stop ( ) twice to cancel the selection when the disc is playing.
TA P E
B playback, the music
B button.
B button.
B.
Regarding the playback of CD-R/RW
.
In the case of an original CD-R(Recordable) recorded in
audio CD format, CD-RW(Rewritable) and editing by the
1
user, playback is processed on the respective
completed status. (The player may not be played back
according to the characteristics of the CD or recorded
status.)
The CD-RW is comparably less reflexive than CD which
causes more time delay to read.
GB
is displayed.
is displayed.
) to start
MUTE
TUNER
TIMER/CLOCK
TIMER ON/OFF
BAND
AUX
PROGRAM/SET
REP. A B
MO/ST
SLEEP
EQ/S.BASS
TAPE SPEED
2,4
DISPLAY
RDS
PTY
POWER SOUND
CD
3
3
6
TUNING
VOLUME
1,7
TUNING
REPEAT
MODE
+10
11
Advertisement
Table of Contents
