Table of Contents
Advertisement
MM-J4-RDS(GB)
9/15/04 15:04
Page 18
Power sound function
GB
This machine is equipped with the function of POWER SOUND,
which amplifies bass treble output to twice as much for powerful
surround-sound.
1
Press the POWER SOUND button on the front panel.
Result:
P.SOUND is displayed for a few seconds.
A more powerful resonant sound is diffused.
2
To cancel this function, press POWER SOUND again.
Result:
OFF is displayed for a few seconds.
.
18
EQ /S.BASS
(Super Bass) Function
Your Micro Component system has a bass amplification function
and equipped with a preset equaliser that allows you to
choose the most appropriate balance between treble and bass
frequencies , according to the type of music you are listening
to.That is called EQ/S.BASS.
This function makes the sound more powerful and real.
Press EQ/S. BASS on the front panel or EQ/S. BASS on the remote
control until the required option is selected.
To obtain a...
Select...
Normal balance (linear)............................................PASS
Balance suitable for pop music............................POP
Balance suitable for rock music ..........................ROCK
Balance suitable for classic music.......................CLASSIC
Balance suitable for s-bass music.......................S-BASS
.
MUTE
TUNER
TIMER/CLOCK
TIMER ON/OFF
BAND
AUX
PROGRAM/SET
REP. A B
MO/ST
EQ/S.BASS
TAPE SPEED
SLEEP
POWER SOUND
DISPLAY
RDS
PTY
CD
Sleep Timer
You can set the system to switch off automatically.
Example: You wish to fall a sleep to music.
1
Press SLEEP on the remote control.
Result: The following indications are displayed:
2
Press SLEEP one or more times to indicate how long the system should
continue playing before it switches off:
90 MIN
60 MIN
45 MIN
OFF
15 MIN
30 MIN
At any time, you can:
Check the remaining time by pressing SLEEP
Change the remaining time by repeating Steps 1 and 2
3
To cancel the sleep timer function, press SLEEP one or more times until
OFF is displayed and the word SLEEP disappears.
TUNER
TIMER/CLOCK
TIMER ON/OFF
BAND
AUX
PROGRAM/SET
REP. A B
MO/ST
EQ/S.BASS
TAPE SPEED
SLEEP
1,2,3
POWER SOUND
DISPLAY
RDS
PTY
CD
MUTE Function
You can turn the sound off temporarily.
Example: You wish to answer a telephone call.
1
Press MUTE.
2
To switch the sound back on (at the same volume as before), press
MUTE again, or press the VOLUME+, -button.
MUTE
TUNER
TIMER/CLOCK
TIMER ON/OFF
BAND
AUX
PROGRAM/SET
REP. A B
MO/ST
SLEEP
EQ/S.BASS
TAPE SPEED
DISPLAY
RDS
PTY
POWER SOUND
Connecting Headphones
You can connect a set of headphones to your micro
component system so that you can listen to music or radio
programs without disturbing other people in the room.
The headphones must have a 3.5 mm connector or
appropriate adaptor.
Connect the headphones to the Phones connector on the rear panel
(or top right corner).
Result: The loudspeakers are no longer used for sound output.
Prolonged use of headphones at a high volume may damage your
hearing.
.
19
GB
Advertisement
Table of Contents
