System Health And System Id Indicator Codes; Idrac Quick Sync 2 Indicator Codes - Dell VxRail P670F Installation And Service Manual

System health and system ID indicator codes

The system health and system ID indicator is located on the left control panel of the system.
System health and
system ID indicator
code
Solid blue
Blinking blue
Solid amber
Blinking amber

iDRAC Quick Sync 2 indicator codes

iDRAC Quick Sync 2 module (optional) is on the left control panel of the system.
iDRAC Quick Sync 2
indicator code
Off (default state)
Solid white
Blinks white rapidly
Blinks white slowly
Blinks white five times
rapidly and then powers off
36 System diagnostics and indicator codes
Condition
Indicates that the system is powered on, is healthy, and system ID mode is not active. Press the
system health and system ID button to switch to system ID mode.
Indicates that the system ID mode is active. Press the system health and system ID button to
switch to system health mode.
Indicates that the system is in fail-safe mode.
If the problem persists, see
Indicates that the system is experiencing a fault. Check the System Event Log for specific error
messages. For information about the event and error messages generated by the system firmware
and agents that monitor system components, go to
error code, and then click Look it up.
Condition
Indicates that the iDRAC Quick Sync
2 feature is powered off. Press the
iDRAC Quick Sync 2 button to power
on the iDRAC Quick Sync 2 feature.
Indicates that iDRAC Quick Sync 2
is ready to communicate. Press the
iDRAC Quick Sync 2 button to power
off.
Indicates data transfer activity.
Indicates that firmware update is in
progress.
Indicates that the iDRAC Quick Sync
2 feature is disabled.
Dell Technologies Support.
qrl.dell.com
Corrective action
If the LED fails to power on, reseat the left control panel
flex cable and check.
If the problem persists, see
If the LED fails to power off, restart the system.
If the problem persists, see
If the indicator continues to blink indefinitely, see
Technologies
If the indicator continues to blink indefinitely, see
Technologies
Check if the iDRAC Quick Sync 2 feature is disabled by
iDRAC.
If the problem persists, see
Support. www.dell.com/poweredgemanuals
OpenManage Server Administrator User's Guide at
https://www.dell.com/openmanagemanuals.
> Look Up > Error Code, type the
Dell Technologies
Dell Technologies
Support.
Support.
Dell Technologies
Support.
Support.
Dell
Dell
or Dell