Connecting the Speakers
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
L
LS
Position of the DVD Player
•
Place it on a stand or cabinet shelf, or under
the TV stand.
Front Speakers
L
R
•
Place these speakers in front of your listening
position, facing inwards (about 45°) toward you.
•
Place the speakers so that their tweeters will be at
the same height as your ear.
•
Align the front face of the front speakers with the
front face of the center speaker or place them
slightly in front of the center speakers.
Center Speaker
C
•
It is best to install it at the same height as the front
speakers.
•
You can also install it directly over or under the TV.
11
C
SW
R
RS
Selecting the Listening Position
The listening position should be located about 2.5 to 3
times the distance of the TV's screen size away from the
TV. Example: For 32" TVs 2~2.4m (6~8feet)
For 55" TVs 3.5~4m (11~13feet)
Rear Speakers
LS
RS
•
Place these speakers behind your listening position.
•
If there isn't enough room, place these speakers to face each other.
•
Place them about 60 to 90cm (2 to 3feet) above your ear, facing
slightly downward.
Unlike the front and center speakers, the rear speakers are used
*
to handle mainly sound effects and sound will not come from
them all the time.
Subwoofer
SW
•
The position of the subwoofer is not so critical.
Place it anywhere you like.
•
Usually, it is placed by a corner near the front speakers.
Front Speaker (L)
Red
White
Purple
Subwoofer
Rear Speaker (L)
Back of the Speakers
1
2
Press down the terminal
Insert the wire into the
tab on the back of the
terminal and release the
speaker.
terminal tab.
•
Insert the black wire into the black
(–) terminal and the gray wire into
the gray (+) terminal.
•
Make sure the polarities (+ and –)
are correctly.
Black
Front Speaker (R)
Center Speaker
Green
Gray
Blue
Rear Speaker (R)
Back of the Main Unit
3
Connect the connecting jacks to
the back of the DVD player.
•
Make sure the colors of the speaker terminals
match the colors of the connecting jacks.
•
Make sure the polarities (+ and -) are correctly.
Gray
VOLTAGE
SELECTOR
12