Listening To Radio; Presetting Stations - Samsung HT-DM7060 Instruction Manual

Digital home cinema system
Table of Contents

Advertisement

Listening to Radio

You can listen to the chosen band (FM, AM broadcast stations) by using either
the automatic or manual tuning operation.
Remote Control Unit
1
2
Tune in to the
Press TUNER/
BAND button.
desired station.
Automatic Tuning 1
The selection toggles back
and forth between "FM
AM" each time the
TUNER(BAND) button is
Automatic Tuning 2
pressed.
Manual Tuning
Main Unit
Press the Function
1
2
Select a broadcast
button to select the
station.
desired band (FM,
AM).
Automatic Tuning 1
PRESET and then press
button to select the preset station.
Automatic Tuning 2
then press and hold
automatically search the band.
Manual Tuning
press
higher frequency.
Press MO/ST button to listen in Mono/Stereo.
(This applies only when listening to an FM station.)
Each time the button is pressed, the sound switches between "STEREO" and "MONO".
53
In a poor reception area, select MONO for a clear, interference-free broadcast.
When
is pressed, a
preset broadcast station is
selected.
Press and hold
to
automatically search for
active broadcasting stations.
Briefly press
to
increase or decrease the
frequency incrementally.
Press the STOP ( )
button to select
Press the STOP ( ) button
to select "MANUAL" and
button to
Press STOP ( ) to select
MANUAL and then briefly
to tune in to a lower or

Presetting Stations

You can store up to:
15 FM stations
15 MW stations
Example: Presetting FM 89.1 in the memory
Press the
1
2
TUNER(BAND)
Press
button and select
select "89.10".
Each time the button is pressed,
Refer to Step 2 on page 53 to
the band switches between
automatically or manually tune in
"FM
MW
LW".
to a station.
MH
Z
kHz
4
5
Press
to
Press the TUNER
select preset number.
MEMORY button.
You can select between 1 and 15.
Press the TUNER MEMORY button before
'PROGRAM' disappears from the display.
'PROGRAM' disappears from the display
and the station is stored in memory.
PROGRAM
MHZ
To tune in to a preset station, press
remote control to select a channel.
• FM
Frequency Modulation
• AM(MW)
Medium Wave
3
Press the TUNER
to
MEMORY button.
"PROGRAM" flashes in the
display.
MH
PROGRAM
Z
TUNED
To preset another
6
station, repeat
steps 2 to 5.
MHZ
on the
MHZ
54

Advertisement

Table of Contents
loading

Table of Contents