Samsung HT-D4500 User Manual page 57

To use the Register Service Account function,
follow these steps:
1. In the Settings menu, select Register Service
Account, and then press the ENTER button.
The Register Service Account Window
appears.
2. Press the ▲▼ arrow buttons to select a
Service Provider you want to associate with
your Smart TV Account, and then press the
ENTER button.
✎
NOTE

If you have a Samsung account and you want
to use the Samsung Apps function in Smart
Hub, you must register your Samsung Apps
account here. See page 60 for more
information.
3. Using your remote and the on-screen
Keypad, enter your site ID and password.
When done, press the ENTER button.
✎
NOTE

This is the ID and password you normally use
to access your account on this site.
4. If you have entered the ID and password
correctly, the Registered Successfully
message appears.
5. If you pressed ENTER, repeat Steps 2
through 4 to associate another Service
Provider.
6. When you are done, press the RETURN
button.
Change Password
The Change Password function lets you change
your Smart Hub password. To change the
password, follow these steps:
1. Select Change Password, and then press
the ENTER button.
2. Enter your current password. The next
screen appears.
3. On the next screen, enter a new password
on the fi rst line. Enter it again on the second
line to confi rm.
HT-D4500_XAA_0609.indd 57 HT-D4500_XAA_0609.indd 57
4. The Changing Password Complete message
screen appears. Press the ENTER button or
wait for the screen to close - about 5
seconds.
Remove from TV Account List
The Remove from TV Account List function
cancels all your current registered Service
Accounts that you registered on the Register
Service Account screen.
Deactivate Account
The Deactivate Account function deactivates your
Smart TV Account and deletes it and all your
account settings entirely from Smart Hub.
Service Manager
The Service Manager menu lets you manage special
applications ( such as AP News, Ticker, etc.)
✎
NOTE

This function is available only if a special
application is installed.
Reset
The Reset function initializes all downloaded
application, erases all user accounts and settings
from the product, and resets all Smart Hub
settings to the factory default settings. It then
restarts Smart Hub as if it were starting for the
fi rst time. Your account, however, remains on the
Smart Hub server. To log into your account, enter
your ID and password on the Create Account
screen.
To use the Reset function, follow these steps:
1. In the Account Management menu, select
Reset, and then press the ENTER button.
The Reset screen appears.
2. Enter the your Security password. This is the
password you entered if you set up a BD or
DVD Parental rating (See page 38). If you did
not, enter 0000.
3. After a few moments, Smart Hub
automatically resets. The screen may go
black, then Smart Hub re-appears. In a few
moments, it starts the re-initialization
procedure.
57
English
2011-06-09 2011-06-09 1:26:56 1:26:56