Safety Instructions - Flamco Meibes Logotherm Logo Basic 30 kW Technical Information For Installation And Operation

1. Safety instructions

Please follow these safety instructions faithfully to eliminate hazards, personal injury and material damage.
Safety instructions
Target group
These instructions are intended exclusively for authorised trained experts.
•
Only trained experts or installers authorised by the respective competent utility company are permitted to work on the heating system, the domestic
water, gas and electric circuits.
Regulations
When carrying out work, you must comply with:
•
The statutory accident prevention regulations,
•
The statutory environmental protection regulations,
• The German Employer's Liability Insurance Association regulations,
• The pertinent safety requirements of DIN, EN, DVGW, TRGI, TRF and VDE,
• ÖNORM, EN, ÖVGW-TR Gas, ÖVGW-TRF and ÖVE,
• SEV, SUVA, SVGW, SVTI, SWKI and VKF
•
and all new and regionally applicable regulations and standards
Instructions for working on the system and system parameters
• Disconnect the system from the mains if applicable and monitor it to ensure that no voltage is being supplied (e.g. at the separate cut-out or a main switch).
• Secure the system against being restarted.
• WARNING: Risk of scalding when media temperature
•
System parameters - heating:
• System parameters - sanitary:
•
The devices must be installed in enclosed, frost-free spaces
•
Observe the safety areas in accordance with EN 60529 when designing and installing the system
• Device protection code in accordance with EN 60520 IP42
max. permissible operating pressure:
max. permissible operating temperature:
max. permissible operating pressure:
max. permissible operating temperature:
optimum operating pressure:
> 60°C
6 bar
110°C
10 bar
110°C
2 bar
23