Matching A Nail Set; Application Of The Uv-Gel - Silvercrest 275423 Operating Instructions Manual

Matching a nail set

Carefully file the transitions from the nail tips
Sandpaper file
only the nail tips
Carefullly file the sides of the nail with the Sandpaper file
and does not exhibit a "wing".
File the nail tip
block
Repeat this step for each individual nail.
Remove the dust from filing with a paper cloth or cellulose pad

Application of the UV-Gel

Using the brush
excess on one side of the brush
Apply a thin coating of UV-Gel
UV Gel
the natural and the artificial nail is created. Furthermore, the transition from
natural to artificial nails is especially sensitive to pressure and knocks, thus
more UV Gel
INFORMATION
► When you are doing the application do not press too heavily on the brush
since the brush
► Model the first layer of the UV Gel
future shape of the nail. Model the best possible natural nail shape.
Maintain a distance of about 1 mm from the cuticle during the application.
■ 20 │ GB │ IE │ NI │ CY
, until they conform to the contour of the natural nail. File
! Do not damage your natural nail.
first with the sandpaper file
. The nail tip should no longer shine.
, take a small amount of UV Gel
to the lower part of the nail, as hereby is how the offset between
must be applied here.
could otherwise cause streaking.
to the natural nails with the
and then with the sanding
off on the edge the UV Gel pot.
onto the complete nail. Apply a little more
very carefully, as this determines the
until it is straight
.
and then wipe the
,
SNS 45 B4