Table of Contents
Advertisement
Remote Control Menu (Enhanced Menu)
The Remote Control Menu is an enhanced menu and is
displayed only when MENU GRADE is set to ENH on
the top menu.
Monitor Display
SETUP MENU
REMOTE CONTROL MENU
RS232C
PARALLEL INPUT
PARALLEL OUTPUT
PARALLEL OUT VOLTAGE
Display
Layer 2
Layer 3
Layer 4
RS232C
n BPS (9600)
PARALLEL INPUT
INm (n PIN)
NO USE
STOP
REC
PLAY
F.FWD
REW
F.FRAME
R.FRAME
SERIES REC
TIME ADJUST >>>Time Set
ALARM RETURN >>>AlmRtn
ALARM (L)
ALARM n (L)
ALARM (H)
ALARM n (H)
: 9600
Char. display
Contents
>RS232C
For setting the baud rate for the RS-232C interface.
>>n bps
n = 1200/2400/4800/9600/19200/38400
>Para Input
For assigning a function to each input pin (24 inputs) of the
PARALLEL I/O connector on the rear panel.
>>n PIN
m = 1 to 24, n = pin number 2 to 13, 21 to 32
Ignores the input signal.
>>>No use
Command inputs corresponding to the tape transport
>>>STOP
>>>REC
control keys on the front panel (Active L)
>>>PLAY
>>>F.FWD
>>>REW
>>>F.FRAME
>>>R.FRAME
Series-recording signal input (Active L)
>>>SerRec
Clock set signal input (Active L).
The internal clock will be set to 00 minute 00 second within ±15
minutes when the signal is input.
Alarm return input (Active L)
>>>Alarm L
Alarm input common to all cameras (Active L)
>>>Alm n L
Independent alarm input to camera n (Active L)
n = Camera No. 1 to 16
>>>Alarm H
Alarm input common to all cameras (Active H)
Independent alarm input to camera n (Active H)
>>>Alm n H
n = Camera No. 1 to 16
Character display
Remote Menu
↓
Press the b key.
>RS232C
The Remote Control menu item selected when you left the
menu the last time is displayed.
The setting shown in
bold characters
column of the table is the standard setting and is displayed
with an asterisk on the monitor screen.
Chapter 4 Menu Operations
in the Layer 3 or 4
(Continued)
4-13
Advertisement
Table of Contents
