Table of Contents
Advertisement
Detaching the Stand
1) Remove the screws highlighted
IMPORTANT - Before drilling any holes in the wall ensure you are not drilling
where there could be any electric wires, water or gas pipes.
Wall mounting the TV
Important – If wall mounting this TV, only
use the screws already provided in the wall
mounting holes. Using other screws which
are longer could cause irreparable damage to
internal parts.
For optimum viewing, if wall mounting the TV
higher than eye level, the TV should be tilted
downwards so that the TV's screen is 'face on'.
See fi g 1 and 2
10
2) Detach the stand from the TV
1) Remove the four screws highlighted below.
2) The wall mount can now be easily attached to the mounting holes on
the rear of the TV. These holes are indicated in the picture below.
fi g 1
INCORRECT
CORRECT
fi g 2
TV
Viewing angle
TV
Advertisement
Table of Contents
