Troubleshooting; Replacing The Power Cord And Plugs; Mouning And Dismounting The Guard - lavina ELITE Series User Manual

Superabrasive User Manual Original Language Lavina® 14E May 12, 2020

8. TROUBLESHOOTING

8.1 REPLACING THE POWER CORD AND PLUGS

When replacing the power cord or plugs, always use cords and plugs with specifications as the original ones.
Never use lower quality or different type cord and plugs.
In addition, take into consideration the distance of the appliance from the electrical source. The greater the distance, the
greater the resistance and the less current that will be available at the other end; there will be a voltage drop and the
inverter will sign alarm mode. This can also happen if several machines are working on the same line or when the generator is
underrated. In general our standard power cable can be doubled in length; if longer lengths are needed you have to replace
all the cables with bigger gage cables, rated for the length and amperage.

8.2 MOUNING AND DISMOUNTING THE GUARD

To remove the guard begin by separating the head from the carriage (sec. 3.3). Once separated:
[1] Flip the head and place on a suitable surface as shown. Remove the security plate and any present tools (sec. 4.3)
[2] Remove the 4 bolts shown and set aside the tool holder.
[3] Remove the 4 bolts securing the guard support.
[4] Pull up on the guard support to remove it and set it aside. The guard assembly is now free to be removed.
22