Table of Contents
Advertisement
9.4.2 "Functions/Programmes Selected by
Pressing the Function Buttons for 3 Seconds"
• Drum Cleaning
• This is not a Laundry washing programme. It is a
maintenance programme.
• Do not run this programme when there are any objects in
CAUTION!
the machine. If you try to do so, the machine detects that
there is a load inside and aborts the programme.
This programme is selected by pressing the 1st auxiliary function key for 3
seconds.
Run this programme with the machine unloaded on a regular basis (once
a month or every two months) to clean the drum. To obtain better results,
put powder lime-scale remover for washing machines into the detergent
compartment no. "2". This programme contains a drying step that runs after
the drum cleaning step to dry the inside of the machine.
• Anti-Creasing+
This function is selected when the 3rd auxiliary function is pressed and
held for 3 seconds and the programme follow-up light for the relevant step
turns on. When the function is selected, the drum rotates for up to 8 hours
for preventing the laundry from creasing at the end of the programme. You
can cancel the programme and take your laundry out at any time during the
8-hour duration. Press the function selection key or the machine on/off
key to cancel the function. The programme follow-up light will remain on
until the function is canceled or the step is complete. If the function is not
cancelled, it will be active in the subsequent washing cycles as well.
Washing Machine / User's Manual
EN / 41
Advertisement
Table of Contents
