Samsung WD80K6 Series User Manual page 22

Hide thumbs Also See for WD80K6 Series:
Table of Contents

Advertisement

Installation
WARNING
Stop using the washing machine if there is a water leak, and contact a local Samsung service
centre. Otherwise, this may cause electric shock.
CAUTION
Do not stretch the water hose by force. If the hose is too short, replace the hose with a
longer, high-pressure hose.
22 English
WD80K6410OW_03858A-03_EN(PL+
).indd 22
7. If you are using a screw type of water
tap, use the provided screw-type
adaptor to connect to the water tap as
shown.
8. Connect the other end of the water
hose to the inlet valve on the back of
the washing machine. Turn the hose
clockwise to tighten.
9. Open the water tap and check if there
are any leaks around the connection
areas. If there are water leaks, repeat the
steps above.
2019/8/22 12:13:33

Advertisement

Chapters

Table of Contents
loading

Table of Contents