Genius SP-HF385BT - Bluetooth Speaker Quick Guide

Also See for SP-HF385BT:

Quick manual (30 pages)

Table of Contents

Contents

1 Bluetooth 5.0 or Line-in
2 USB Powered / Plug and Play
3 In-line Control
4 Operation Description
5 Button Funcon
6 Documents / Resources
- 6.1 Download manual

Genius SP-HF385BT - Bluetooth Speaker Quick Guide

Bluetooth 5.0 or Line-in

One simple click switch between Bluetooth and Ø3.5mm wired Line-in mode. You can use this SP-HF385BT speakers to connect music from portable MP3, mobile phone, ipad, laptop computer, or smart TV.
Bluetooth 5.0 or Line-in

USB Powered / Plug and Play

USB Powered / Plug and Play
Our Bluetooth speakers are powered by USB, to avoid the trouble of charging.

In-line Control

In-line Control
warning Note: Bluetooth model need using with power source of DC 5V 1A.

Operation Description

The USB power plug of speaker is plugged in.
Turn on the power and enter the LINE function by default. The red LED is always on. At this time, the audio cable can be inserted into the audio device to play music.
Short press button on the remote control to enter the Bluetooth status, and the blue LEDs will flash alternately. At this time, you can pair the Bluetooth device. After the pairing is successful, there will make a notification sound. The blue LED is always on. At this me, the audio device can play music.
Short press button on the remote control to stop playing music, click again to resume playback. Short press on the remote control, increase the volume, press twice consecutively to go to the previous song, long press button on the remote control to increase the volume, and the speaker sounds louder. Short press on the remote control, the volume decreases, press twice consecutively to go to the next track, long press button on the remote control to decrease the volume, and the speaker sound is reduced.
Pairing: In the Bluetooth status, long press button on the remote control for 3 seconds. When the speaker will make a notificaon sound, it indicates that the current pairing device is released and the pairing mode is entered. The blue LED flash alternately. At this me, Bluetooth device pairing can be performed.
After press button on the remote control to enter the Bluetooth mode. If there is a paired device, it will return to the paired device. If there is no paired device, it will enter the pairing mode.
In pairing mode, search for Bluetooth pairing device 3 times, and it will automatically turn off if there is no signal for 5 minutes in Bluetooth mode.
Turn off: Long press the button for 3 seconds to turn off power and the LED.
After restarting, the volume level will automatically return to the middle value, and the last volume level will not be remembered.

Button Funcon

	Status	Function	Button Operation	Description
1	Turn off	Turn on	Short press the button	The red LED is on when the USB power cord of speaker is plugged in, and enters LINE mode
	Power on	Bluetooth	Short press button	Blue LED flash alternately and enter pairing status. The blue LED is always on.
	Power on	Line	Short press button	When the speaker will make a notification sound, it indicates that the current LINE mode is entered. The red LED always on.
	Power on	Turn off	Long press the button for 3 seconds	Turn off power and LED.
2	Bluetooth / Line	Increase Volume	Short press button Long press button	Short press the button to to increase volume. Long press the button to increase volume continuously.
3	Bluetooth / Line	Decrease Volume	Shot press button Long press button	Short press the button to decrease volume Long press the button to decrease volume continuously.
4	Bluetooth	Previous Track	Press twice button	Press twice button consecutively to go to the previous track
5	Bluetooth	Next Track	Press twice button	Press twice button consecutively to go to the next track
6	Play music	Pause	Short press button	Short press button to stop playing music, click again to resume playback.
6	Line	Mute	Short press button	Short press the button enters to mute status. Press it again, the music unmute.
7	Bluetooth	PAIR	Long press the button for 3 seconds	Long press the button for 3 seconds. When the speaker will make a notification sound, it indicates that the current pairing device is released and the pairing mode is entered. The blue LED flash alternately. At this me, Bluetooth device pairing can be performed.