How To Wear; Factory Reset The Earpieces - Philips TAT2205 User Manual

Low battery level
(earpieces).
Low battery level
(charging case).
Battery is fully
charged(earpieces)
Battery is fully
charged(charging
case).
Battery LED indicator on
earpieces status
It will show a battery indicator on
Bluetooth device after connected to
earpieces.

How to wear

You will hear
'battery low' on
the earpieces.
The white LED
ash twice.
Only the rst blue
LED goes on
The white LED on
the earpieces is o
The four blue LED
on the charging
case is on.
5 Factory reset
the earpieces
If you encounter any pairing or connection
issue, you can follow the following
procedure to factory reset your earpieces.
On your Bluetooth device, go to the
Bluetooth menu and remove
Philips TAT2205/TAT2235/TAT2245
from the device list.
Turn off the Bluetooth function of your
Bluetooth device.
Put both earpieces back to charging
case. Both earpieces flashes white led.
Press and hold both earpieces
function button for 4s,until earpieces
flashes twice white led .
To pair the earpieces with a Bluetooth
device, turn on the Bluetooth function
of your Bluetooth device, select
Philips TAT2205/TAT2235/TAT2245