Alert Type (Menu 3.3); Tone Length (Menu 3.4); Message Tone (Menu 3.5); Error Tone (Menu 3.6) - Samsung STH-A255 User Manual

T T o o n n e e s s
Alert Type
This option allows you to indicate how you are to be
informed of any incoming calls. The following options
are available:
Light Only: only the backlight is switched on; the
phone neither rings nor vibrates.
Melody: the phone rings using the ringer tone
selected via the Ring Tone menu option (Menu 3.2).
Vibration: the phone vibrates but does not ring.
Vibra+Melody: the phone first vibrates three times
and then starts ringing.
Tone Length
The tone length setting enables you to select Short
or Long DTMF (dual-tone multi-frequency) tones.
DTMF tones are what your phone transmits to access
teleservices, such as a bank account. The system
used by the bank or other service determines if you
need short or long DTMF. If the service is digital
which most are these days, short DTMF tones will
almost always work. However, some new systems
and almost all older analog system require you to
use long DTMF tones.
72
Menu 3.3
Menu 3.4
Message Tone
This option allows you to select how the phone
informs you that a new message is received.
The following options are available:
Light Only: the service light in the top right-hand
corner of the phone flashes.
Vibration: the phone vibrates but does not ring.
Single Beep: the phone beeps once.
SMS Tone1~10: the phone uses an SMS tone. You
are provided with 10 SMS tones.
Error Tone
This option allows you to select how the phone
informs you that you have made a mistake.
The following options are available:
OFF: the phone does not beep.
ON: the phone beeps to indicate an invalid entry.
T T o o n n e e s s
Menu 3.5
Menu 3.6
73