Table of Contents
Advertisement
Torque motor
Installation example
Following is an installation example. If you have any questions, please contact our
service department.
•
Contact details for the Kessler Service can be found in the chapter "Service
and Support".
Installation steps
(1) Wrap a 1 mm thick aluminium sheet around the rotor shaft. Ensure that the
rotor bandage is not damaged.
(2) Use a centering device to align the rotor shaft above the stator package.
(3) Guide the rotor shaft carefully into the stator package.
(4) Use the threads along the shaft to affix the rotor shaft.
(5) Remove the aluminium sheet.
Key:
(1) Rotor shaft with block magnets
(2) Stator package with housing
F
Axial force of attraction
a
F
Radial force of attraction
r
Assembly instructions
5 Assembly
28/69
Advertisement
Table of Contents
