Table of Contents
Advertisement
You need these settings to use the web
browser or send MMS messages or e-mails.
Your phone is set up by default for
connecting to the network. If you change
the settings without first checking with
your service provider, the web browser,
MMS, and e-mail features may not work
properly.
Creating a WAP profile
1. Press <New>. If a profile has already
been saved, press <Options> and
select Add new connection.
2. Set profile parameters:
•
Profile name: enter a profile name.
•
Homepage URL: enter the URL
address of the page to be used as
your homepage.
•
Proxy: activate or deactivate the
proxy server.
•
IP address: enter the IP address of
the proxy server.
•
Port: enter the port number of the
proxy server.
•
Linger time: set a time period after
which the network is disconnected if
there has been no new data traffic in
that time.
•
DNS: activate or deactivate the DNS
(Domain Name Server) addresses.
•
DNS 1 and DNS 2: enter the primary
and secondary DNS addresses.
•
Bearer: select the network bearer
type.
•
Advanced settings: change the
advanced options. Depending on the
bearer setting, available options vary.
When the bearer is set to GPRS:
APN: enter the access point name.
Login ID: enter the login ID.
Password: enter the login
password.
When the bearer is set to GSM:
Dial number: enter the PPP phone
number.
Login ID: enter the login ID.
Password: enter the login
password.
91
Advertisement
Table of Contents
