Table of Contents
Advertisement
•
Authorise device/Unauthorised
device: determine whether or not the
phone asks you to permit connection
when other devices try to connect to
your phone.
•
Delete: remove the selected device or
all devices from the list.
Sending data via Bluetooth
1. Activate the Bluetooth feature.
2. Select the application in which the item
you want to send is stored.
3. Scroll to the item you want and press
<Options>.
4. Select Send via → Bluetooth.
Select Search for new devices.
The phone searches for devices within
range and displays a list of available
devices.
5. Select a device.
6. If necessary, enter the Bluetooth PIN
needed for pairing and press <OK>.
Receiving data via Bluetooth
To receive data via Bluetooth, your phone's
Bluetooth feature must be active and its
visibility must be enabled.
1. If an unauthorised Bluetooth device
sends data to your phone, press <Yes>
to allow the device to access your phone.
2. Press <Yes> to receive data.
Security
(Menu 9.8)
Use this menu to protect the phone against
unauthorised use by managing the several
access codes of your phone and SIM card.
If you enter an incorrect PIN/PIN2 three
times in succession, the SIM card is
blocked. To unblock it, you need to enter
your PUK/PUK2 (Personal Unblocking
Key). The codes are supplied by your
service provider.
PIN check
(Menu 9.8.1)
The 4- to 8-digit PIN (Personal Identification
Number) protects your SIM card against
unauthorised use. When this feature is
enabled, the phone requires your PIN each
time it is switched on.
89
Advertisement
Table of Contents
