Starting VoiceSignal
To start VoiceSignal 2.0, press the
on your phone.
VoiceSignal prompts you to "Say a command" and
displays the available commands at the bottom of the
screen.
Note: When you first start VoiceSignal, it voice-activates the names stored
in your contact list. While reading your contacts, VoiceSignal displays the
following message: Please wait while VoiceSignal voice-activates your
contacts.
You can change VoiceSignal settings by starting
VoiceSignal and then selecting the "Settings" soft key. See
the appendix "VoiceSignal Settings" for a description of
the settings you can change.
Calling a Name or Number
Use the Call command to place a call. If the number you
want to call is stored in your contact list, you can say the
contact name and, optionally, which number (home,
52